内插螺旋立式上行管流场及传热性能的实验研究

通过粒子图像测速流场实验与传热实验相结合，研究了内插螺旋立式上行管的螺旋节距、丝径、中径比等结构参数在不同Re下对流场、阻力及传热性能的影响。结果表明，内插螺旋能够有效扰动和混合管内流体，使管内形成多个纵向旋涡的流体结构、增大管壁附近液体涡量，有利于强化传热。当Re相同时，管内平均流速v、Nu和综合换热性能PEC均随丝径增大而增大，随中径比减小而增大；随节距增大，3种参数均出现增大的趋势，节距大于20 mm后开始减小。管内流体的阻力f随丝径和节距增大而减小，随中径比增大而增大。综合比较，在较低Re时，节距p=20 mm、丝径e=1.6 mm、中径比D/d=0.75时综合传热效果最好。     

Study of the surfactant role in latex–aerogel systems by scanning transmission electron microscopy on aqueous suspensions

For insulation applications, boards thinner than 2 cm are under design with specific thermal conductivities lower than 15 mW m^?1 K^?1. This requires binding slightly hydrophobic aerogels which are highly nanoporous granular materials. To reach this step and ensure insulation board durability at the building scale, it is compulsory to design, characterise and analyse the microstructure at the nanoscale. It is indeed necessary to understand how the solid material is formed from a liquid suspension. This issue is addressed in this paper through wet‐STEM experiments carried out in an Environmental Scanning Electron Microscope (ESEM). Latex–surfactant binary blends and latex–surfactant–aerogel ternary systems are studied, with two different surfactants of very different chemical structures. Image analysis is used to distinguish the different components and get quantitative morphological parameters which describe the sample architecture. The evolution of such morphological parameters during water evaporation permits a good understanding of the role of the surfactant.     

Identification of heavy metal-contaminated Tegillarca granosa using laser-induced breakdown spectroscopy and linear regression for classification

Tegillarca granosa (T. granosa) is susceptible to heavy metals, which may pose a threat to consumer health. Thus, healthy and polluted T. granosa should be distinguished quickly. This study aimed to rapidly identify heavy metal pollution by using laser-induced breakdown spectroscopy (LIBS) coupled with linear regression classification (LRC). Five types of T. granosa were studied, namely, Cd-, Zn-, Pb-contaminated, mixed contaminated, and control samples. Threshold method was applied to extract the significant variables from LIBS spectra. Then, LRC was used to classify the different types of T. granosa. Other classification models and feature selection methods were used for comparison. LRC was the best model, achieving an accuracy of 90.67%. Results indicated that LIBS combined with LRC is effective and feasible for T. granosa heavy metal detection.     

基于循环一致性对抗网络的室内火焰图像场景迁移

基于深度学习的视频火灾探测模型的训练依赖于大量的正负样本数据,即火灾视频和带有干扰的场景视频。由于很多室内场合禁止点火,导致该场景下的火灾视频样本不足。本文基于生成对抗网络,将其他相似场景下录制的火焰迁移到指定场景,以此增广限制性场合下的火灾视频数据。文中提出将火焰内核预先植入场景使之具备完整的内容信息,再通过添加烟雾和地面反射等风格信息,完成场景与火焰的融合。该方法克服了现有多模态图像转换方法在图像转换过程中因丢失信息而造成的背景失真问题。同时为减少数据采集工作量,采用循环一致性生成对抗网络以解除训练图像必须严格匹配的限制。实验表明,与现有多模态图像转换相比,本文方法可以保证场景中火焰形态的多样性,迁移后的场景具有较高的视觉真实性,所得结果的FID与LPIPS值最小,分别为119.6和0.134 2。     

细粒尾矿综合利用技术研究

姑山矿业公司为提高细粒尾矿的综合利用率，研究分析了细粒尾矿的性质，系统研究了尾矿含量、煅烧工艺制度对不同成分体系尾矿陶粒堆积密度、表观密度、空隙率、吸水率、筒压强度及软化系数的影响。研究得出了全尾矿陶粒、细粒尾矿+污泥陶粒、细粒尾矿+污泥+粉煤灰陶粒3种成分体系的尾矿陶粒较优的尾矿含量及煅烧工艺制度，且3种尾矿陶粒均可代替石头用作粗集料。     

基于卷积神经网络的葡萄叶片氮含量识别方法

为实现对葡萄叶片氮素含量快速、便捷的识别，在卷积神经网络VGG-16网络结构基础上，将数据增广后的图像按不同梯度划分进行模型训练，通过十折交叉验证法探究最佳的训练集与验证集分配比例，并构建4个不同深度的网络模型进行训练对比，采用全局平均池化代替全连接层约简网络参数量。训练结果表明，氮含量梯度设为0.70%、0.35%和0.175%时，室内简单背景识别准确率分别为85.9%、76.2%和71.1%；晴天室外复杂背景下识别准确率分别为44.6%、35.0%和30.4%。研究结果表明利用VGG-16建立的网络学习模型对葡萄叶片氮含量识别提供了一种新的便捷方法，对农业信息化和智能化技术应用具有一定促进作用。     

基于局部特征的青年女性腿部形态分类

为提高女性裤装的合体性与舒适性,采用三维测量法、图像测量法及手工测量法相结合的方式,对236名18~25岁的青年女性腿部形态进行测量,获取20个相关特征变量;通过主成分因子分析得到影响腿部形态的主要特征因子,通过聚类分析得到青年女性腿部形态的分类结果;最后结合膝曲角的正负归纳出各类腿部形态的辨别规则并进行辨别验证。研究得出:影响腿部形态的主要特征因子有水平围度因子、长度因子、小腿围度差因子、腿部曲度因子、腿部轮廓因子和大腿围度差因子;人体腿部形态可分成圆体型、稍扁体型和扁体型3类;以大腿宽厚比、大腿根围膝围比、大小腿长比及膝曲角4个变量建立腿部形态分类规则。